RNGR.net is sponsored by the USDA Forest Service and Southern Regional Extension Forestry and is a colloborative effort between these two agencies.

U.S. Department of Agriculture USDA Forest Service Southern Regional Extension Forestry Southern Regional Extension Forestry

Skip to content. | Skip to navigation

Home Publications Tree Planters' Notes Tree Planters' Notes Volume 23, Number 1 (1972) Four hardwood species differ in tolerance to pruning

Four hardwood species differ in tolerance to pruning

Current recommendations for hardwood planting stock specify a root collar at least 1/4 inch in diameter for best survival and early growth. However, large seedlings are cumbersome and expensive to bundle, transport, and plant. The solution to this problem has been some degree of root and top pruning. Sycamore and ash top pruned to 8 inches and with the tap root trimmed to 8 inches had better than 95 percent survival on five bottomland sites in East Texas. Water oak and cherrybark oak treated the same survived at around 80 percent.2 Briscoe (1969) reported that toppruned sycamore lost no ability to survive and grow when the tap root was trimmed to less than 4 inches and all laterals were removed.


Download this file:

PDF document Download this file — PDF document, 113Kb

Details

Author(s): Ronald A. Woessner

Publication: Tree Planters' Notes - Volume 23, Number 1 (1972)

Volume: 23

Number: 1